New Product

Vacuum Equipment Magnet Buffer　ZP3B□M Series Stable buffer reaction force during stroke Adsorbs workpieces with different heights, Reduces the impact applied to a workpiece Low particle generationNo particle generation due to the friction of a spring (spring-less structure) Non-rotatingReduces rotation by 4-pole magnets Copper and zinc-free Compatible with secondary battery manufacturing processes Vacuum Gripper System (Foam Type)　ZGS Series Foam size: 300 mm x 180 mm / 200 mm x 120 mm [New] Suitable for the palletizing and depalletizing of corrugated cardboard, etc. Ejector unitCombines all functions required for adsorption(Ejector, Supply valve/Release valve, Silencer, Pressure switch) Can be used immediately by simply connecting 1 electrical cable and air piping Compatible with the collaborative robots of 4 companiesUNIVERSAL ROBOTS, OMRON/TECHMAN ROBOT, FANUC, YASKAWA Electric Lifting force440 N (200 x 120) (At −63 kPa)880 N (300 x 180) (At −63 kPa)2144 N (400 x 240) (At −75 kPa) IO-Link compatible∗ Only for sizes 300 x 180 and 200 x 120 Suction Cup/With Non-slip Feature　ZP3M Series An oval flat shape with non-slip feature has been added. [New]Compatible with workpieces with an elongated adsorption surface Longer life (More than twice that of urethane cups)Cup material: FS61 (Fluoro-based rubber) with excellent abrasion resistanceReduced number of cup replacements Non-slip special ribsDiagonal ribs are radially arranged to secure the gripping force in all directions.・Prevents workpiece slippage・Secure adsorbing and transferring are possible. Bowl shape with excellent flexibilityCurved workpieces can also be adsorbed.The cup follows the workpiece shape, making stable adsorption possible.Horizontal holding force: 387 N (Cup diameter ø100)Suitable for high-temperature workpieces (200°C) Suitable for workpieces with oil filmAs oil is ejected to the grooves between special ribs, the lateral slipping of workpiece can be suppressed even on a steel plate with oil film.

Rotary Actuators/ Air Grippers Compact Position Sensor　D-MPG Series Detects the stroke position of compact actuators such as air grippers Repeatability: 0.1 mm Compact sensor head and separate teach unit Same shape as the D-M9□ solid state auto switch Analog output Switch output IO-Link compatible Rotary Actuators　CRB/CDRB Series A double vane type has been added for sizes 10 to 40. [New] Features a compact body with a built-in angle adjustment unit andauto switch unit (Size: 20, 30, 40)Overall length: 44% shorter, Weight: 48% lighter Piping, wiring, and angle adjustment can be performed on the same side for easier mounting. Easy-to-adjust start and end positions with the angle adjustment bolts(as standard) The position of the chamfered portion of the shaft can be easily checked using the rotating angle indicator. (Only for the CDRB with auto switch) Each of the units below for the CRB2 series can be mounted to the CRB series. Tool Changer/Auto Type　RMTA Series Robot hand tool automatic exchange Standards: ISO9409-1 compliantSupport for direct mounting on collaborative robots Robot and end tool connection/release More compact as flanges are not required.Direct mounting on collaborative robots eliminates the need for flanges and reduces design labor Supports a work load of up to 20 kg (Work load: 5 kg, 10 kg, 20 kg)

Actuators ISO Standards (21287) Compact Cylinder　C55/CD55 Series Smooth cylinder (C55Y) has been added. [New] Made of stainless steel (-XC6) has been added. [New] ISO Standards (21287) 1.8 times the anti-lateral load capacityThe allowable lateral load has been improved by changing the material of the bushing. (For ø20) Increased the standard product’s maximum stroke limit (to 300 mm) Standardization of the double rod (C55W) type, smooth cylinder (C55Y), simple specials, and made-to-order options [New]Change of rod end shape (-XA□)Heat-resistant cylinder (–10°C to 150°C) (-XB6)Low-speed cylinder (5 to 50 mm/s) (-XB13) Water Separator for Vacuum　AMJ-D Series Removes water droplets in the vacuum linePrevents vacuum equipment failures Weight: Max. 30% reduction (AMJ40-D: 0.42 kg b AMJ4000: 0.6 kg) Water drop removal ratio: 99% or more Better environmental resistance with 2-layer constructionThe bowl is covered with a transparent bowl guard.Superior visibility: 360° Pin Clamp Cylinder Lateral Compact Type　C(L)KQ32-X3445 Lateral Compact Type Compact: Overall length: 94 mm shorter (183mm→89mm)∗ Lightweight: Weight: 38% reduction (900g→560g)∗∗Compared with the existing product CKQG32-X2081, LOW type, without lock Lock mechanism to prevent the dropping of workpieces during emergency stops Various clamp arm positions and port positions are available. Mountable on 2 surfaces

Directional Control Valves Valve Manifold Integrated with Ejector System JSY1000-E Series Spacer type ejector with High-noise reduction silencer (Selectable) [New] A vacuum release flow adjustment unit has been added. [New] Compact All-in-One ManifoldThe devices have been integrated into one for applications in which an actuator and vacuum suction are used together. EtherCAT®，IO-Link [New] , PROFINET® [New] ，EtherNet/IP™ [New] compatible Wiring/Piping Saving through Use of All-in-One Manifold Installation area: 64%reduction Weight: 42%reduction Energy Saving FunctionCO2emissions (Air consumption) : 90% reduction Wireless System　EXW1/EX600-W Series Analog input has been added to the compact type EXW1 Series. [New] Noise resistance　Uses the 2.4 GHz ISM frequency band　Frequency hopping: Every 2 ms (Fastest) Communication cables not requiredReduced wiring work, space, and costMinimized disconnection risk Provides communication stability in FA environments Compact and lightweight (EXW1)Volume: Approx. 81% reduction, Weight: Approx. 79% reduction Modular connection is possible. (EX600-W) Lever Hand Valve　VHL Series Space saving, Easy to operate (Vertical type) 5-port lever valve Weight reduction of up to 45%∗ Comparison between VHL21□D-02□ and VH210-□02 Footprint reduced by 58%VHL210D 3216.5 mm2 ⬅ VH20□ 7750 mm2 Panel mounting internal height reduced by 18.6 mmFor panel mounting∗ Comparison between VHL210D and the existing VH20□ model Flow rate increased by 73%∗ Comparison between VH211□-02□ and VH210-□02(Flow rate characteristics 1 → 4/2 (P → A/B)) 3 operation types

Standard Air Cylinders Round Type CJ1 For the double acting type, the piping direction of the fitting on the rod   Air Cylinder CJ2/CDJ2 Double foot and head flange have been added to the available mounting types. Easy fine adjustment of auto switch position The auto switch mounting type, band, or rail can be selected with the model number. Part numbers with a rod end bracket and/or pivot bracket are available.(It is not necessary to order a bracket for the applicable cylinder separately.) With auto switch (CDJ2-Z series: CDJ2, CDJ2W, CDJ2K, CDJ2Z, CDJ2ZW, CDJ2RA, CDJ2RK)